AT pneumatic actuator

AT pneumatic actuator product overview

The new type of gear rack pneumatic actuator combines the latest technology AT home and abroad to optimize the design through CAD 3d model, with a beautiful, compact and modern shape. And adopt the practical new material, the new technology, make the product quality, the performance more reliable; Multi-specification selection is more economical; The products meet the latest international standard technical specifications and meet the current and future requirements.

AT pneumatic actuator product features

1.The double-piston symmetrical structure design of the gear rack is fast and smooth, with high precision and high output power. The piston assembly position can be turned in the opposite direction by simply changing the assembly position of the piston.

2.Extrusion of high quality aluminum alloy cylinder block, the precision machining of the inner hole and outside surface of hard anodic oxidation treatment (special circumstances anodic oxidation + fluoro lung coating), longer service life and low friction coefficient.

3.One-piece design, all double-acting and single-acting implement number, have the same cylinder and end cover, which is convenient to change the way of action by adding spring or removing spring.

4.The combination of the pre-loaded safety spring groups, which can be easily and safely installed or added or decreased in the assembly process or in the use of the site.

5.External side two separate adjusting screw for installed on the valve actuator is more accurate and convenient, regulating valve and the closed position, if you need full stroke control is also at the two end cover configuration is longer than the adjusting screw.

6.Multi-function position indicator, on-site visual indication, VID/VIE3845, NAMUR standard slot, can install and output all attachments, such as limit switch box, electrical locator, position sensor (pepperl + fuchs, figure,).

7.The gas source interface meets the NRMAR standard, and the NUMAR standard solenoid valve can be installed directly.

8.The compound material on the back of the rack and the piston guide ring and the bearing of the output shaft are used to prevent the metal from rubbing against the metal, and increase lubrication, so as to reduce friction and long life.

9.All fasteners are made of stainless steel and have long corrosion resistance.

10.The connection section meets the new international standard ISO5211, DIN3337 (f03-f25), which makes the installation interchangeable and versatile.