Conductor pressure control valve

Operational command device self-reliance type single-seat pressure regulator (hereinafter referred to as for nitrogen valve), the valve does not need additional energy, energy (gas) modulated medium itself is used as the source of power, introducing command device detection enforcement agencies, to control the pressure regulating valve valve core position, change the medium flow through the valve, keep the valve after pressure at a constant value. The characteristics of the valve: the pressure setting value can be realized on the controller, and can be adjusted in the operation, so it is convenient, quick and easy to save. The control precision is about twice as high as the normal pressure control valve.

Standard technical parameters

Body type: straight/tee casting ball valve

Nominal size: DN20 - DN150

Rated pressure: PN16

Connection mode: flange: FF, RF, RJ, etc

Threads: DIN, NPT, RC, BSP, G, etc

Welding: GB12224-89

Sealing cover form: PN16 convex surface

Materials: WCB, WCC, WC6, 304, 316, 304L, 316L

On the cover: standard (5℃~ + 70 ℃)

High temperature type no condenser (< 200℃)

Gland form: pressure plate type

Fill: V type fluorine teflon, flexible graphite

Valve components

Valve core form: single cylinder, metal seal, soft seal, quick opening characteristics

Valve core material: 304, PTFE

Actuator

Form: film type

Diaphragm material: reinforced polyester fabric with a rubber sandwich

Signal interface: internal thread M16 x 1.5

Command 

Form: film type

Diaphragm material: reinforced polyester fabric with a rubber sandwich

Signal interface: internal thread M16 x 1.5

Performance

Rated KV: reference table

Traffic characteristics: fast

Action: post-valve pressure control

Pressure adjustment range: reference table

Pressure control accuracy: plus or minus 2.5%

Leakage level: metal seal: less than 0.01 (ANSI B16.104-1976IV

Soft seal: less than 0.00001%